NOTE: Atari is a trademark of the respective company, and is
no way related to the products listed below.
THESE PRODUCTS ARE PROVIDED "AS IS", WITHOUT
WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
ARISING FROM, OUT OF OR IN CONNECTION WITH THESE PRODUCTS OR THE USE
OR OTHER DEALINGS IN THESE PRODUCTS.
The MonSTerbo is a new Atari STE accelerator with 68000 and 68020 CPUs on board.
MC68SEC000 up to 48MHz - see IMPORTANT below
MC68EC020 up to 40MHz - see IMPORTANT below
Dual IDE Controller with selectable hardware byte-swap mode
8MB ALT-RAM
16MB FLASH ROM
68881/2 support (FPU not included)
Expansion Socket, compatible with the MegaST and 32bit capable.
SPI Master to control up to 4 devices, using the SCL/SDA lines if no RTC connected.
RTC clock module support via SCL/SDA
No soldering required
Additional features...
Cartridge Emulation. The FlashROM can also store up to 16 cartridges when using ROMs less than 1MB. Cartridge Emulation can also be done via FastRAM without the need to use FlashROM.
MapROM where fast RAM is used to emulate the ROMs. This speeds up ROM access, but can also be used to test ROMs before flashing.
